New from Validation Online a combined IQ/OQ protocol. Designed to cover equipment in general and specifically laboratory type equipment, with or without embedded or programmable software. This is not a list of chapter headings. It is a fully detailed interactive IQ and OQ protocol.

Now you too can raise a competent IQ / OQ combined protocol in matter of hours, and sometime even in minutes.

This Combined IQ – OQ protocol is a really easy and attractive document to use. It is prefaced by a 10 page SOP, which enables you to follow the SOP instruction and progressively (page by page) convert this fully detailed template into a superb IQ/OQ protocol.

This protocol is targeted at equipment and is suitable for all equipment from the laboratory to the process line. All standard verifications are already included in the protocol format and all test scripts are fully documented and referenced.

Validation Online documents should never be confused with the routine document templates available on the internet. These templates are mainly little more than a list of chapter headings. Where as, Validation Online documents are of a unique interactive design which has been developed over the last ten years. Ten years during which regulatory compliant documentation has been successfully supplied to over sixty countries.

Our unique design was developed by a team of pharmaceutical consultants working across the pharmaceutical, medical device and biotechnical industries. These consultants covered all the validation disciplines and collectively pondered long and hard to come up with a design that would be acceptable to all users and highly cost effective for companies.

Now this new combined IQ – OQ protocol brings a refreshingly simple and attractive approach for the industry professional, enabling them to raise professional quality validation protocols in a very efficient and cost effective manner.
Combined_IQ-OQ_Issue-1 -- $125.00

Calibration of Humidity & Hygrometer Sensors.

Humidity sensors require frequent calibration to ensure they are not causing your Air Handling Units to over dry the air for your facility. This is a very common fault and can increase your energy costs by over 200%. It really is cost effective to calibrate in house.

The calibration kit arrives ready to use and only requires annual recertification. It is housed in a robust neat and easy to handle carrying case.

To read more or purchase your test kit please click on link below.


Are you ready for an inspection?
With HEPA filters, the manufacturers recommended dirty filter change pressure differential (PD), is only correct if the filter is used at exactly the the same air flow as the makers specify. If there is any digression (there is often as much as 50% digression) then the makers PD must be corrected. If this is not carried out you can compromise the integrity of your room / machine pressure regimes. As you are no doubt aware this would be a very serious state to be in. There are also health and safety problems that can arise, if personnel are not getting the air flow protection that is sometimes designed into the system. This test script is not in the standard OQ, and is only available here as a download.  Regulators ask to review your writen justification for these filter change PD's; make certain you have them.
Purchase your copy of this test script now at Special Price of $16.00.

The SOP for Equipment Validation continues to be an extremely popular document. This document leads you through the validation process, from the URS to the final P2Q.
Purchase your copy now at Special Price of $16.00.