Where Building HVAC environmental parameters, such as temperature, humidity, particle content and biological contamination are important aspects of pharmaceutical, biotechnical and or medical device production, validation and qualification of the building HVAC system must be performed.
This building Habitat validation must utilize a risk-based approach, which involves a high level of process understanding and focuses on potential problems, risks, and all suitable countermeasures. The building HVAC validation must verify that in all areas where drugs or raw materials have air contact, the air cannot adversely affect the quality of the product.
To fulfill regulatory requirements, a clean room building-HVAC system must maintain environmental condition within specified specifications. These conditions must be regularly monitored to ensure constant awareness of environmental conditions, such as temperature, humidity, pressure and particle levels. Digital outputs for alarms must also be monitored to ensure that an alarm will be raised if there is a change in any of the designated parameters.
All such environmentally controlled areas, zones and or rooms must be included in a preventative maintenance and calibration program that will monitor all trends and ensure continued use within the User Requirements specified specifications.
A fundamental problem is that in conventional building HVAC systems; with conventional cooling coils (whether using chilled water or direct-expansion refrigerant) the latent loads from ventilation on very humid days can be excessive. All conventional chillers and air conditioners are essentially sensible cooling devices that dehumidify by lowering air temperature below its dew-point so that moisture condenses. These systems must run with a wet cooling coil and the air that leaves this coil must be close to saturation.
The limitation of conventional chillers and direct-expansion (DX) air conditioners becomes evident when one tries to use them in an advanced HVAC system. Technologies such as displacement ventilation, chilled beams, and radiate panels can be part of a low-energy building HVAC system that eliminates the fan energy used in a conventional system that recirculates large volumes of air. However, these advanced systems will not work with a conventional chiller or DX air conditioner that supplies relatively cold air (e.g., 50 to 55 F) that is saturated with moisture (i.e., 100% rh). What is required is a cooling system that supplies drier, but warmer air.
Typical supply air conditions for displacement ventilation are 65 F and 50% relative humidity. This supply air has an absolute humidity of 45.5 grains moisture per pound of dry air (which is equivalent to a humidity ratio of 65 g/kg and a dewpoint of 46.0 F). Any cooling system that dehumidifies air by reducing its temperature to condense the moisture must first cool air to below 46 F and then reheat the air to 65 F. As shown on the neighboring psychometric chart, a cooling system that process 6,000 cfm of warm, humid outdoor air must do 54.0 tons of cooling and then 10.8 tons of reheating. This air conditioner is doing 25% more cooling than is required to meet the load. Furthermore, this percent excess cooling becomes much larger during cooler, damp weather, e.g., if it were 70 F and raining, over-cooling would be 42% of the required cooling.
This cycle is seldom understood by management, who consequently fail to realise that the rise in energy consumption of a system 'out of calibration' can be very substantial. These systems should be subjected to annual calibration and a defined method of tuning to attain minimum energy consumption.
This combined building HVAC SOP and IQ template makes it so easy for you to raise a quality IQ. With the new suite of building HVAC documents from the DQ - IQ - OQ - PQ, all user friendly and ready to go, your Building HVAC validation has got much simpler. The final product is a professional and comprehensive Heating Ventilation and Air Conditioning Installation Validation Protocol. One that you can produce in less than 60 minutes. Yes, think about it, we all know how long producing IQ documents has taken in the past. There is now no reason for not being able to produce 4 to 8, IQ protocols per 8 hour day, or a complete suite in one day.
This fully formatted Building HVAC Performance Validation is the last in the chain of qualifying tests that building HVAC systems are subjected to, before being considered qualified. However environmental validation is required to verify air quality. This easy to use Building HVAC Validation SOP and Protocol, can be simply and quickly converted (using find replace techniques) into your own company bespoke document. Now you can purchase these document in a suite DQ to PQ, getting you ready at express speed to qualify a system. It has never been quicker or simpler.
For Your Security We are Now TLS 1.2 Compliant
Validation Plan (Issue 8)
This document follows our well developed method of using a generic document and allowing the customer to apply an attached detailed SOP to it, turning the generic document quickly into a first class company bespoke document. This VP details and integrates all validation activities and procedures required for a small to medium sized project, involving production/facility/utility equipment/ building HVAC using electronic controls or monitoring.
Validation Risk Assessment (Issue-11.) $125.00
The Risk and Part 11 Validation Risk Assessment(VRA) protocol is becoming the most important document in the validation train. The VRA reassures the regulators that you have looked at specific equipment functionality and considered the appropriate level of validation that is required. You have also considered various aspects of its use and the implications of any malfunctions. From the results of this exercise the scope of all validation activity can and must be justified. This is a robust and simple to execute document, one that will lead you through the process and deliver a result that can be used as the foundation for your validation activities.
This VRA now includes the assessment table for categorizing and documenting the new 21 CFR Part 11 guidance ruling on what predicate data must be stored in a Part compliant system, along with the new broadsheet to establish your new database of part 11 records. (now mandatory). Applies to all building HVAC protocols.
Top of Form
Cold Chain Zone IQ (Issue 5)
The SOP used to generate this IQ, takes you through the process line by line, chapter by chapter. It really is unique to find a SOP document so easy to use, all the work is done for you. All the documents are detailed, all the drawings listed and all the checks and tests detailed. The final product is a professional and comprehensive Installation Qualification Protocol for your temperature controlled cabinet or room. One that you can produce in less than 60 minutes. Yes, think about it, we all know how long producing IQ documents has taken in the past. This applies to all building HVAC protocols.
Top of Form
Cold Chain Zone OQ (Issue 7). $115.00 10000404
You will find the step by step attached SOP delightfully simple and straightforward to use, as it takes you through the process of customization of your Operational Qualification Protocol template. Following the attached SOP will quickly and smoothly convert your template into an equipment specific Operational Qualification Protocol for your temperature controlled cabinet or room. The OQ template comes complete with all the standard test scripts, more specialist test scripts can be found listed below. These can easily be pasted into the standard OQ, allowing you to quickly build your own fully detailed and referenced company bespoke Operational Qualification Protocol. Applies to all building HVAC protocols.
eTop of Form
Cold Chain Zone PQ (Issue 4)
The Performance Qualification is the last of the qualifying tests that equipment and processes are subjected to, prior to the actual first product run. It maybe that there are some steps in the process that can only be verified by actually running them (quick freezing and sublimation, to mention only two) or it sometimes is the fact that the product is a very expensive product, and can not be wasted. So no one wants to run the process with product, until they are completely certain there will be minimal waste. This does not apply to building HVAC systems
You want to validate a cold container or a mobile cold cabinet or a vehicle integral container or smaller service van. In this case you require the following validation protocols; This package is complete with all the validation documentation you require to validate the climatic condition within a warehouse a room or a large cabinet. Documentation includes our interactive and detailed Validation Plan (VP) the Validation Risk Assessment (VRA) the really easy to use Installation Qualification (IQ), the Operational Qualification (OQ) and finally the Performance Qualification (PQ). Along with the documentation are 10 highly accurate and easy to use data loggers ready to monitor and record close to 17K (each) parameters over what ever time base you select. This is now the simplest most expedient and most cost effective method of validating the climatic condition within any climatically controlled zone.
All building HVAC protocols are interactive and fully detailed.
VP, VRA, IQ, OQ, PQ.
This package consists of one of each of these documents.
You want to validate a cold container or a mobile cold cabinet or a vehicle integral container or smaller service van. In this case you require the following validation protocols; This package is complete with all the validation documentation you require to validate the climatic condition within a warehouse a room or a large cabinet. Documentation includes our interactive and detailed Validation Plan (VP) the Validation Risk Assessment (VRA) the really easy to use Installation Qualification (IQ), the Operational Qualification (OQ) and finally the Performance Qualification (PQ). This is now the simplest most expedient building HVAC method of validating the climatic condition within any climatically controlled zone.
Each of these protocols are interactive and fully detailed.
VP, VRA, IQ, OQ, PQ.
This package consists of one of each of these documents.