HOW TO USE VALIDATION RISK ASSESSMENTs WITHIN cGMP REQUIREMENTS



Validation Risk Assessment Plan Introduction.

Image illustrates validation risk & Requirements plan execution.

This Validation Risk Assessment Plan (VraP) is one document designed specifically to replace three. The contents of the three original documents were completely revised and edited into a more compact and interactive format. Resulting in the VraP document becoming notably easier to use and quicker to review and edit. This new format will make a very significant difference to the man hours required to produce and execute the Validation risk assessment ra documents. There will also be a very noticeable reduction in the time required for the reviewing and approving tasks. This new document; titled the VrrP, replaces the older style VP, VRA, & URS.  Seamlessly integrating with this Validation Risk Assessment Plan is our equally new 4Q Protocol, which integrates the DQ/IQ/OQ/PQ into one document. This 4Q document is an essential step forward for companies seeking to reduce validation costs without sacrificing regulatory compliance.

VrrP + 4Q = FDA Compliant qualification.


4Q Equipment Protocol.

Image illustrates validation Rate & Requirements Plan procedure.

The Equipment Validation risk assessment Plan has been designed specifically to replace the four standard protocols. By taking the contents of these four protocols and carefully weaving them into one notably easy to use protocol, we have made a significant advance in the task of streamlining validation documentation by reducing protocol numbers by close to 75%. The new bang up to date 4Q protocol replaces the DQ, IQ, OQ & PQ and now compliments our equally new Validation Risk Requirements Plan (VrrP). By integrating the old style DQ/IQ/OQ/PQ into one 4Q document there will be enormous savings in man hours in the authoring, reviewing, updating and approving tasks. For everyone's convenience, it is prefaced with a 10 page SOP containing detailed step by step instructions for you to use in in converting this interactive template into your own bespoke company document.  For the end users convenience it is still written in MS word.


4Q_Equip-Package.

Image is an illustration of Validation Rate & Requirements Plan procedure.

This quite revolutionary two document package is all that is required to fully validate; to cGMP standards, equipment used in a regulated facility. A lot of effort has gone into ensuring that repetitive instructions and actions have been designed out and innovative and intuitive risk-based methodologies have been incorporated. Both documents are prefaced with a methods Standard Operating Practice (SOP) document. These SOP’s lead you through the task of converting these highly detailed templates into your very own company bespoke protocols. The hyperlinks and cross-references within the package are; not only unique, but also highly cost effective and intuitive to use. Each document is preloaded with the test scripts (complete with acceptance criteria). All test and inspection scripts are written in MS word, to facilitate simple editing of text, layout, tables and schematics.


VALIDATION RISK REQUIREMENTS PLAN.



Validation Risk Assessment (Issue 11) $125.00

Validation Risk Assessment template (Issue 11) $125.00 The Risk and Part 11 Validation Risk Assessment(VRA) protocol is becoming the most important document in the validation train. The VRA reassures the regulators that you have looked at specific equipment functionality and considered the appropriate level of validation that is required. You have also considered various aspects of its use and the implications of any malfunctions. From the results of this exercise the scope of all validation activity can and must be justified. This is a robust and simple to execute document, one that will lead you through the process and deliver a result that can be used as the foundation for your validation risk assessment template.

This VRA now includes the assessment table for categorizing and documenting the new 21 CFR Part 11 guidance ruling on what predicate data must be stored in a Part compliant system, along with the new broadsheet to establish your new database of part 11 records. (now mandatory).



Combined IQ-OQ-PQ Computer (Issue-4) $159.00

This Pharmaceutical Validation combination protocol has been produced in response to several hundred reader suggestions we received in our ‘Suggestions Section’. It has been carefully designed to make it the preferred choice for Process and Laboratory stand alone equipment and associated standard operating procedure TEMPLATE. The associated medical device validation  Master Plan template is interactive, easy to use and suitable for all mixes of equipment with and without software. Where temperature mapping is required it will included in this section. This of course may well be a validation risk Assessment template. As per 21 CFR Part 11.

The Installation Qualification Template or IQ section establishes documented verification that all medical device validation template online executables are catered for and that key aspects of the equipment Qualification adhere to approved design Qualification template and the recommendations of the manufacturer have been suitably considered. The Operational Qualification Template section establishes that there is documented verification that the installed system functions as specified and that there is sufficient documented process validation A executables to demonstrate this. The PQ section develops documented evidence that all the requirements specified in your corporate validation 4U manual have been verified as operating consistently and exactly as specified in the medical device validation template; The User Requirements Specification template 



User Requirements Specification (Issue 8) $115.00

This document was designed to be used as a live document up until the DQ is completed and approved. It uses three levels of URS, URS Level 1, 2 and 3, and is the only URS to guarantee traceability from the User requirements specification template through to the final PQ and OQ functionality testing. A mandatory requirement for Full Life Cycle Validation of computer systems and compliance with Current Good Manufacturing Practice legislation. It can be used on mechanical, electrical and software controlled, monitored or driven systems and of course medical device validatioN Template along with the Software Qualification template.



Installation Qualification. SOP & Protocol (Issue 9.) $115.00 10000020

The Standard Operating Procedure template (SOP) used to generate this installation Qualification template (IQ), takes you through the process line by line, chapter by chapter. It really is unique to find a SOP document so easy to use, all the work is done for you. All the documents are detailed, all the drawings listed and all the checks and tests detailed. The final product is a professional and comprehensive Installation Qualification template. One that you can produce in less than 60 minutes. Yes, think about it, we all know how long producing IQ documents has taken in the past, whether for current Good Manufacturing Practice use medical device use or a simple installation qualification template. 



Operational Qualification, SOP & Protocol (Issue 10.) $115.00 

You will find the Operational Qualification template (OQ) delightfully simple and straightforward to use, as it takes you through the process of customization of your Operational Qualification Protocol template. Following the attached SOP will quickly and smoothly convert your template into an equipment specific 21 CFR Part 11 compliant Installation  Qualification Template. The OQ template comes complete with all the standard test scripts, more specialist test scripts can be found listed below. These can easily be pasted into the standard OQ, allowing you to quickly build your own fully detailed and referenced company bespoke Operational Qualification Protocol, along with the installation qualification template.



01200002_VrrP_Equip_ Iss-4.  $299.00

This Validation, Risk & Requirements Plan (VrrP) is one document designed specifically to replace three. The contents of the three original documents were completely revised and edited into a more compact and interactive format. This new format will make a very significant difference to the man hours required to produce and execute these documents. There will also be a very noticeable reduction in the time required for the reviewing and approving tasks. This new document titled the VrrP replaces the VP, VRA & URS and now compliments our equally new 4Q Protocol, which integrates the DQ/IQ/OQ/PQ into one document. This is an essential step forward for companies seeking to reduce validation costs without infringing regulatory standards.



12000006_4Q_Equip_iss-4___$299.00

4Q Equipment Validation Protocol (4Q-Equip) has been designed specifically to replace four standard protocols. By taking the contents of the four protocol and carefully weaving them into one notably easy to use protocol, we have made a significant advance in the task of streamlining validation documentation by reducing protocol numbers by close to 75%. The new bang up to date 4Q protocol replaces the DQ, IQ, OQ & PQ and now compliments our equally new VrrP Protocol. By integrating the old style DQ/IQ/OQ/PQ into one 4Q document there will be enormous savings in man hours in the authoring, reviewing, updating and approving tasks. For everyone's convenience, it is still written in word.



12000008 4Q Equip-Package.
$499.00

This quite revolutionary two document package is all that is required to fully validate; to cGMP standards, equipment used in a regulated facility. A lot of effort has gone into ensuring that repetitive instructions and actions have been designed out and innovative and intuitive risk-based methodologies have been incorporated. Both documents are prefaced with a methods Standard Operating Practice (SOP) document. These SOP’s lead you through the task of converting these highly detailed templates into your very own company bespoke protocols. The hyperlinks and cross-references within the package are; not only unique, but also highly cost effective and intuitive to use. Each document is preloaded with the test scripts (complete with acceptance criteria). All test and inspection scripts are written in MS word, to facilitate simple editing of text, layout, tables and schematics.